The Japhar Sim is capable of working on all DM boxes, DM800HD/DM800HDse/DM500HD/DM8000HD. But the sim arrives programmed for the box you bought it for. So if you received a Japhar Sim for DM800HD it will work on the DM800HD. If you want it working on another box you will need to use a programmer (GCR2 available at http://www.japhar.com/japhar/) to reflash the sim card with the right OS for the box you want to use it to.

The DM800HD Japhar Sim is capable of running all Sim 1.0, Ferrari, Japhar and Sim 2.01/2.10 images. So we call it a Triple Sim card (as it does all sim Teams).

The DM800HDse/DM500HD/DM8000HD Japhar Sim OS is capable of running all Ferrari and Japhar images.

The sim card when you order comes programmed for the box you want (but you can always reprogram it yourself for another box if you want). You have all instructions and Tutorials also sent at the same time.

Admin

Ajuda por favor...
...matei a minha dreamSE sem me aperceber... Estava a meter uma nova imagem e estava a achar muito demorado, não reparei... Que a barra de percentagem de carregar a imagem estava por baixo da barra de ferramentas do pc... Como estava a demorar muito, fui desligar e ligar de novo carregando no power para meter de novo em modo flache, ai já ficou em dreaMultimedia já não deu ip, quando voltei ao pc vi que a barra de load já mostrava 12%, portanto fiz sem querer o que estou farto de saber, que não se deve fazer, desligar enquanto está a flachar!
O nosso digníssimo Administrador pode informar-me se há recuperação possível?

Obrigado

Help please...
... I killed my dreamSE without realizing ... I was putting a new image and I was finding it very time consuming, I did not notice ... That the percentage bar to load the image was under the toolbar of the pc. .. As it was taking so long, I went off and on again loading the power to get back to flache mode, there already was in dreaMultimedia no longer gave ip, when I returned to the pc I saw that the load bar already showed 12% so I did not want what I'm tired of knowing, that you should not do it, turn it off while you're floating!
Can our honorable Administrator inform me if there is a possible recovery?

Thank you very much

The DM boxes never die ! There is always fixes.

In your case most probably JapharFlasher with a USB/RS232 cable and a RJ45 connected to your Modem/Router will fix your issue. Search for JapharFlasher, to restore your box.

Admin

Dear Adim
Consegui com a ajuda de um amigo, melhor o amigo consegui-o dar vida a dm800SE de novo, e eu mesmo flache uma imagem Black all; funcionou umas 3 semanas, deixou 1º de dar imagem e ao fim de uns 4 dias deixou de fazer share... Fui tentar carregar uma imagem openAtv 6.1 tirada do site OpenAtv para dream800se carregou mas ao fazer boot ficou de novo em NOT CA FOUND o meu amigo já tentou de novo, já adquiri-o ip varias vezes mas ao tentar carregar imagem openAtv 5.3 ou 6.1 fica a calcular Jackson e não carrega imagem... tenho que adquirir um programador para reprogramar o superSim3 ou basta o programar atravez da box? Gostava de a acordar de novo e carregar ou a openAtv 6.1 ou a mais recente da openpli 4.0 ou superior que são as imagens que melhor domino. pode o amigo me informar ou ajudar no passo a passo para a reavivar de novo e carregar a openAtv 6.1 ou a + recente Openpli image para a dream800SE clone ? Não tenho conhecimento para fazer sozinho.

obrigado

***
Dear Adim
I got it with the help of a friend, but the friend was able to give me life again, and I myself floated a Black all image; worked for 3 weeks, left 1 to give image and at the end of 4 days left to make share ... I was trying to load an image openAtv 6.1 taken from the OpenAtv site for dream800se uploaded but on boot it was again in NOT CA FOUND o my friend already tried again, already suited ip several times but when trying to load image openAtv 5.3 or 6.1 is calculating jakson and does not load image ... do I have to get a programmer to reprogram the superSim3 or just program it through the box? I would like to wake it up again and load either the openAtv 6.1 or the latest from openpli 4.0 or higher which are the images that I master best. can the friend inform me or help in the step by step to re-revive the box, and load the openAtv 6.1 or the + recent Openpli to dream800se clone?

I´ve no knowelge to do it my self alone !

thanks a lots

Hello,

You can no problem reflash your Japhar NC3 Sim (programmed for any box) to work with DM800HDse box, you will need to download the Japhar OS for DM800HDse from the forum.

Japhar Dual OS (Ferrari+Japhar) : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=201&page=1

Then use the GCR2 programmer, that is available on the eshop of the Team (http://www.japhar.com/japhar/), but the GCR2 is very common in Portugal so you should be able to find someone around you having it (it's used for the Health card I think).

Then you will be able to use any of the Firmware/Images on the DM800HDse Japhar Section.

Japhar DM800HDse (v1) Section : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=48&page=1

Admin

Hello Mr. Admin, or Mr. Toysoft, thanks for the reply in the forum S.Universe, actually I still have my dream800se clone, not working, because my friend who does the favor of trying to give it life, does not have much time and I have to wait. .. until he is available, I already downloaded a series of files to a folder, but I do not know if they are correct, I have not yet found the GCR2 programmer for the card n3supersim ... maybe I have to buy one in your forum ... is it possible to load a v2 or v3 image on the dm800se clone? for this you have to program the n3supersim according to version v1, v2, or v3 image etc, what do I intend to load? thanks for your patience in giving me information and support.

my best regards

The NC3 SuperSim arrives programmed, for the DM800HDse there were 2 versions (v3-v5) and the v4beta.

So if you ordered the sim card as a DM800HDseV1, then it will work directly with no need of reflashing. If you ordered for another box, you will need to reflash the v3-v5 OS to access all images (as the BetaV4 was only Beta and issued during 1 month, but you can adapt the new images to it with JAM update of driver as explained).

Use the JapharFlasher if you have NO CA ERROR on the Color OLED, and flash an image from the DM800HDse V1 section, then your box will work as new.

DM800HDse Images : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=48&page=1

Admin