My great thanks to u and ur team my VID/PID is 148f/3572.
but the driver of rt3572 not work nor rt 2870.but when i installed open pli 3 for dreambox 800se sim 2.10 the
driver worked soo good.but the tune failed as there is no patched driver for dm800se ferrariboot 84f.

On open pli the diver was rt 2800 and worked soo good.but for driver 3.2. So i need the driver of 2800 for 2.6.18-7.4-module.

Try this one, from post below, named : wifi_1.0a_dm800se.ipk

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=242#Post242

Admin

P.S.: But the best would be to swap your sim to the new sim Japhar that will support the latest images, so you will have no more problems with Wifi drivers.

hello i would like to ask for help i searching over google tons of forums registered everywhere i cant make any dongle to work on my DM500HD Ferrari Sim i will post full info here if someone can help me to try make it work i will be gratefull i use newnigma2 3.3.2 :

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=5372 Rev= 1.01
S: Manufacturer=Ralink
S: Product=802.11 n WLAN
S: SerialNumber=1.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I: If#= 0 Alt= 0 #EPs= 5 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms


also i got onother wifi dongle TL-WN823N RTL8192CU chipset somehow i manage to make it reconize in the network but soon as i press adapter settings it crash all the newnigma green screen and restart in 10 seconds ... sorry for my bad english thanks upfront for any help


also uname -a

Linux dm500hd 2.6.18-7.4-dm500hd #1 SMP Tue Mar 27 08:48:34 UTC 2012 7405b0-smp GNU/Linux

Give us also the informations about your second Dongle with PID:VID,

Admin

P.S.:
About the first one : I don't find any for the 5372 into a DM500HD. Try the one attached.

About 2nd : Try
rtl8192cu_3.3.0-r6.2_dm500hd.ipk
and
rtl871x_2.6.6.0-r6.2_dm500hd.ipk

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=333#Post333

thank you very much i tryed with the RALINK driver with rt5370sta_2.5_dm500hd-mipsel.ipk its now working its showed in the network that i have instered USB DONGLE but soon as i enter it and press adapter setting again green screen and restart after 10 seconds it wont activate the dongle soon as it start its crashing same as the second dongle its showed in the network everything good but soon as i try to active it its crashing but still i got PID AND VID maybe you could help me more or tell me do i change the newnigma2 to openpli or any other software maybe it wont crash ... because its impossible drivers to be loaded and soon as i try to set it up to crash ps : PID AND VID FOR THE TPLINK

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=8178 Rev= 2.00
S: Manufacturer=802.11n
S: Product=USB WLAN
S: SerialNumber=00e04c000001
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8192cu
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=125us


thank you alot you are the only person that helped me the best way now but im still gonna search to find out why its crashing the newnigma2

Yes, try with these drivers but on OpenPLi image, you have much more chances that it works.

You can also try the image OpenPLi 2.1 with RALINK RT537x built-in, on link below, all is ready and could work directly.

https://mega.nz/#!BcVU3abC!1rNh8oJZudKsrURsF6PHbalxmg3EAB_cecLyC3Mg0m8

Admin

thank you very very very much i manage to make the TPLINK dongle work but the problem was in the newnigma2 its crappy but when i installed openpli + the drivers you gave me the TPLINK worked the RALNIK worked reconized but when i press to scan does not find any networks im trying now to find the rt5370sta_2.5_dm500hd-mipsel.ipk but for dm800hd se for the original dreambox i got but thank you alot for the great support im very gratefull

The file above from MEGA works fine with the RT537x, I installed it on my DM500HD... so try it without installing again the drivers as the drivers are already installed for the RT537x.

Admin

i understand you but my dreambox ferrari dm 500 hd is the old ferrari sim its not the new and it have ssl87 i need to get the new sim or something somehow someone need to guide me with that and i installed openpli from other forum that i know its working with my dreambox ferrari sim not that i do not want to install your image

Just install it, it will work, and if you are happy of the image to have it to work at the best, just then order the new sim Japhar from http://www.japhar.com/japhar/

The image above works fine for BOTH, Japhar and Ferrari... but it's better for future support to have the Japhar installed. So if you are happy and it works well, get the Japhar then.

Admin

hello! im new to this forum i read the postes here about RT5370 wireless adapter from railink. i have it too and i installed this firmwire that was posted here, but it doesnt work. it finds the adapter but cant find any network or connect to any.... somebody have any ide how to get RT5370 to work with Dm500 hd open pli image?

If you install OpenPLi from Jole, you will be able to run the RT5370 (without the need to install any driver, as it's already pre-installed), but you will need to remove from the drivers section the RT7777 file, the RT5370 will then work instead of the RT7777. On Jole911 image there is both, RT7777 and RT5370 pre-installed.

/lib/modules/2.6.18-7.4-dm500hd/kernel/drivers/net/wireless

Admin

Sometimes it works, for OpenPLi 4.0,

Check this,



Admin

Hi,i have a TP-LINK TL-WN725N v2 (Realtek RTL8188EUS chip) and DM800se clone with Nemesis_2.6_SVN-112r3_dm800se-Japhar_SSL84J_April23
Have a driver for this usb wlan stick?

It should be updatable thru the normal Nemesis Feeds, see their forum naturally not telling you have a clone box ;o) as they really dont like it (risk of ban).

http://www.nemesis.tv/forums/forum.php

http://www.nemesis.tv/forums/forumdisplay.php?59-DTT-DECODER

http://www.nemesis.tv/forums/forumdisplay.php?114-DM-800se-HD-PVR

Admin

If someone can help!
I have wifi dongle ID 148f:5370 Ralink Technology, Corp. !
I try to connect my DM800SE ferrari (Dream Elite v. 3.0, ssl87f oe 1.6) to my wifi router with no success! I have installed driver "rt5370sta_2.5_dm800se-mipsel.ipk" ! My wlan config menu appear and I scan and find my network but it won't connect. I try every possible config : open , DHCP on/off etc... but no luck!! Please help!!

You have 3 options,

- Set your network to WEP or to Open, and see if it works.

- Move to OpenPli 4.0 IPTV for Japhar, as your dongle is supported fine.

- You can also use Jole911 images, these generally work with RT5370 (in that case remove from the image the RT7777 driver in /lib/modules)... or get an RT7777 from http://www.japhar.com/japhar/ that works on this image for example : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=1224#Post1224

Admin

Thanks to admin for suggestions!!

Just a question. Can I move to Open pli 4.0 with my old ferrari sim and louder ssl87f or I have to replace the sim with Japhar sim??

You need to upgrade your box to the Japhar Sim, removing the old Ferrari that is no more supported, by the new Japhar Sim you can find for members only here, http://www.japhar.com/japhar/

Have a nice day !

TS

Hi

I am trying to use D-Link DWA-110, a WLAN USB with Ralink RT73 chip in cvs+gp3 (OE2.0) image, but I've never been successful.

First, I updated all the plugins in "Manage Extensions" section and then I installed the "wlan-rt73_1.0-r6_dm800.ipk" file, by using the file browser. After that I cold booted my Dreambox DM800 HD PVR. I was waiting to see the orange LED on USB WLAN during the boot process, but nothing happened! Image booted up, and when I went to the Network section, there was no sign of any WLAN option!


I'm not an expert in linux based programming so please help me in a way that I can do it by myself.

Thanks.

My info:

root@dm800:/var/volatile/tmp# lsusb
Bus 001 Device 002: ID 07d1:3c07 D-Link System Wireless G DWA-110 Adapter

root@dm800:/var/volatile/tmp# uname -a
Linux dm800 2.6.18-7.4-dm800 #1 Tue Jan 7 22:28:24 CET 2014 7401c0 GNU/Linux

root@dm800:/var/volatile/tmp# cat /proc/bus/usb/devices
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=07d1 ProdID=3c07 Rev= 0.01
S: Manufacturer=Ralink
S: Product=802.11 bg WLAN
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=300mA
I: If#= 0 Alt= 0 #EPs= 5 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

The most important is that a driver needs to be compiled for the image you are using. So when you choose an image, be sure that the devices you want to connect if they need drivers, are supported and available for the image you install from the feeds.

This is the best tip we can give, as without that you are mostly sure to never be able to install a driver/hardware into your box/image.

Driver should be the RT73, as you can read below.
https://wikidevi.com/wiki/D-Link_DWA-110_rev_A1

Admin

nothing find

It's related to your image, only if your image support the driver it will work, and driver needs to come from the feeds of your image... so then change image.

Admin