Originally Posted By: Admin
Use JapharFlasher,

Admin


Hello,

i tried with JapharFlasher but still the same,
but between my tries now i see that shows on display just error! with no ca found and i tried to connect with putty with serial and ethernet cable and when i power on db the red led is blinking then in putty shows
Quote:
(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BI5I6E5xE3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #56 (20080115)

And then i push the front button and shows these
Quote:
MAC ADDR: 00 09 34 2c 8c b8
12.903 - network: 12.904 dhcp
> dhcp...
12.932 - starting network
100 MB Full-Duplex (auto-neg)
14.629 - httpd, telnetd, dreamupd
14.632 - ok. start receiving packets
14.635 - starting dhcp (or manual)
14.638 - network: 14.640 dhcp
> dhcp...
14.642 - dhcp started!
waiting for DHCP...
17.628 - got IP address from dhcp
> 192.168.1.10
no server address given
using dhcp address
no tftp bootfile name was specified, neither manually nor via dhcp. aborting tftp.
tftp failed.


Shows that takes ip for a little time but then tftp failed, do you know how can be fixed?

Thank you