Unfortunately, the images are not clear enough to see the connections.
But check these pins, whether they give an ohm value between the ground, and the measuring point.

If so, it has a good chance that the vu J chip can work on it.
But, on these pins you can not solder wires, they are far too small.
You will have to find another place with some ohm measurements of where these pins go.



Attachments
Snap2.jpg (550 downloads)

_________________________
Doing nothing leads to nothing.

------------- Please note, for technical support -------------
Will be given here, or on the jb8a8f8 forum and I prefer it in English.
Johnny B.

Click on the banner if you like to go there..