Overclocking DM800HDse

It's possible to run your dm800se at 460MHz instead of the default 400MHz.

Al you need to do is move a resistor (R1818) from the bottom side of the mainboard to an empty resitor spot (R1819) at the top of the mainboard.

Please note, you need to have good soldering skills and preferable 2 small soldering irons to remove the resistor, of course smd soldering equipment would be ideal !
I am not responsible for any damage done to the Dreambox by this modification


Quote:
cat /proc/cpuinfo
system type : BCM7413B1 STB platform
processor : 0
cpu model : Brcm4380 V4.4 FPU V0.1
BogoMIPS : 403.45
cpu MHz : 405.013



Quote:
cat /proc/cpuinfo
system type : BCM7413B1 STB platform
processor : 0
cpu model : Brcm4380 V4.4 FPU V0.1
BogoMIPS : 456.70
cpu MHz : 459.017



--------------------

Quote:
openpli 2.1 dm800se

dm800se login: root
root@dm800se:~# cat /proc/cpuinfo
system type : BCM97xxx Settop Platform
build target : dm800se
processor : 0
cpu model : Brcm4380 V4.4 FPU V0.1
cpu MHz : 456.70
BogoMIPS : 456.70 ( udelay_val : 228352 HZ = 1000 )
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : no
ASEs implemented : mips16
VCED exceptions : not available
VCEI exceptions : not available
RAC setting : Unknown
unaligned access : 13925
rdhwr/brdhwr traps : 0 / 0
process migrations : 506
processor : 1
cpu model : Brcm4380 V4.4 FPU V0.1
cpu MHz : 458.75
BogoMIPS : 458.75 ( udelay_val : 229376 HZ = 1000 )
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : no
ASEs implemented : mips16
VCED exceptions : not available
VCEI exceptions : not available
RAC setting : Unknown
root@dm800se:~#



All the best about hardware/support from Johnny_B, link :
http://jb8a8f8.com
http://jb8a8f8.nl


Attachments
01.jpg (112 downloads)
02.jpg

03.jpg (124 downloads)
04.jpg (110 downloads)

_________________________