Hello Gaston,

Good, so now we can check which sim you ordered (if it was the correct one for your box). Your VIP is 883. Keep the Japhar sim in the box, that is the best sim for the DM800HDseV2 boxes.

The Sim definitely works, and you confirm it as images are booting properly, and if you use any image on the section DM800HDseV2, it will work. But naturally you just have to install the image and NOT twist/modify, flash anything on top of it like an SSL or anything else. You must just flash the image and set it up with the configuration menus.

DM800HDseV2 Japhar : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=49&page=1

1) Concerning the Cam, if you use OpenPLi you need to install from the JAM the "SoftCam Plugin", then only install the Cam from the OpenPLi section. If you use any BlackHole image as you wrote, you need to install the Cam from the BlackHole section of the JAM. It's important, as when such software is installed there is some extra scripts installed that are built for the image/GUI that is installed in your box.

2) Concerning the IPTV List, if must be under the format below, that is used for example in our Japhar FTA IPTV List. Check if your file you try to install is correct, and it must be added on the bouquets.tv file that list all the bouquets. Concerning the BlackHole Images, some images require to setup it to use not only the Favourites as main list, but all lists from the bouquets.tv file (in /etc/enigma2). But you tell that your list is working, so it seems ok as well and in the correct format.

Format used on Enigma2 for Streams:


The only point above, that is left for you as a problem, is the Cam, so be sure you install the right one for your image from the JAM, and if it's OpenPLi don't forget to install the "SoftCam Support" Plugin first from the JAM, before installing any Cam from the JAM (or anywhere else).

Admin