You need to do the Flashing of the image into the box via the Webinterface. This needs to be enabled by pressing the frontpanel button when you start the box until you see the IP address of the box on the LCD.

Or you can connect the JapharFlasher, with a RS232 cable from PC to box, and a RJ45 from Router/Modem to the box.

If you dont see anything happening it means one of both of your cables doesn't communicate properly.

You also need first to check the sim in your box, before you load a wrong image... and send it in Error...

See topic to find out your sim, and then choose the right image for your box.

Link : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=2675#Post2675

And the best tutorial for flashing the image is this one, please read it carefully : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=2478#Post2478

It will show how you need to do to flash an image with DreamUp/JapharFlasher (also if not in NO CA ERROR).

TS