As far as I know, you have it now about the P703 which is a 6 pins ICPS connector and I have no information about that.

As for the TL866II Plus, this has a ICPS port but you need to take a look to the pinout of it.
In any case, the duo seems to have also a another port, the P401
which is a jtag connector but also by this, you need to check at least the vcc and ground pins before you do an attempt to connect it because the connections are often not basic.
But it has as far as I know, there is no use to do that.

The one I gave was the P301 four pins I2C (Jtag) connector.
This is placed between the U807/U804 and can be used with the Cypress board to do an attempt to fix the boot loader of the box.

_________________________
Doing nothing leads to nothing.

------------- Please note, for technical support -------------
Will be given here, or on the jb8a8f8 forum and I prefer it in English.
Johnny B.

Click on the banner if you like to go there..