You committed at least 2 errors... and didn't done at all what I wrote...

The image on the link is OpenVision 7.2 r18 (v6), and the second link is the ALLSIM SSL. As wrote you just had to flash the image then the ALLSIM SSL, and after reboot.

So you done all different from what was written. If you have the button on the back, then put back the Sim 2.10 is it's not there already, and do again as explained above. You will then have the box in the correct mode, to then use the JAM to flash the Japhar Sim on the frontpanel slot. Japhar Sim that then will be able to be used on DM800HDse V1 boxes (instead of the Sim 2.10), naturally with Japhar images (v3-v5 and v6).

Admin
_________________________