12432 Members
237 Forums
7733 Topics
23829 Posts
Max Online: 4756 @ 02/20/20 11:12 PM
|
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
31
|
|
|
|
|
|
#22125 - 10/16/20 02:57 PM
Re: DM800HDse v2 clone
[Re: BytePir8]
|
Japhar Member
Carpal Tunnel
Registered: 10/19/10
Posts: 9886
|
So the process seems ok, but are you sure you seen all the numbers on the TV screen of the programming of the Sim from Japhar DM800HDse V2 to V1 ? Was the received connected on internet when you done that last step as it has to download the data from the JAM Feeds ? You probably had some failure during programming of the sim... did you put it on the right slot as there is 2 on the DM800HDse ? As it uses only the one indicated on the description of the JAM line you selected for Frontpanel programming. The Japhar chip must have the chip below looking down, as well as it must be first inserted. I believe you failed the programming, and this is why you have such error... if you naturally installed the proper image, that is coming only from our folder below, just to be sure you done all steps right. Images : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=48&page=1As you know the section where we are right now is ONLY for the original images/box/A8P sim. So an image on this section WILL NOT work on the DM800HDse with Japhar Sim. This could be also the problem. So you have two possible reasons, the programming failed, or wrong image used (naturally if we consider and we are sure you properly inserted the Japhar Sim instead of the Sim 2.10). Admin
_________________________
|
|
Top
|
|
|
|
|
|
|
Previous Topic
Index
