Ok, I got my RT3070 ID 148f:3070 load to dm800se:

Code:
root@dm800se:~# opkg update
root@dm800se:~# opkg install kernel-module-rt2800usb-3.2-dm800se
root@dm800se:~# opkg install firmware-rt2870


lsmod reply:

Code:
root@dm800se:~# lsmod
Module                  Size  Used by
nfsd                  263139  11
exportfs                3857  1 nfsd
ipv6                  274766  48
trialtunerdriver       15684  0
nim_sockets            15200  1 trialtunerdriver
rt2800usb              13556  0
rt2x00usb               9529  1 rt2800usb
rt2800lib              42325  1 rt2800usb
rt2x00lib              38089  3 rt2800lib,rt2x00usb,rt2800usb
mac80211              214851  3 rt2x00lib,rt2800lib,rt2x00usb
cfg80211              171939  2 mac80211,rt2x00lib
crc_ccitt               1099  1 rt2800lib


The problem is that it cannot connect by WPA/WPA2, it runs only with no encrypted wifi.

I tried with these:

https://forums.openpli.org/topic/19046-dm800-wifi-lan-strange-behaviour/#entry208723

and

https://forums.openpli.org/topic/60364-zgemma-h9-wifi-encryption/

but not helped.

I also read a old post of @gdk1 :

Originally Posted By: gdk1
...... Also I set HAS_WPA_SUPPLICANT=y and HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n in config.mk .....


but I cannot find the config.mk file


Attachments
1-0-1-1-F8-384-13-E-820000-0-0-0-20210326120639.jpg


_________________________
Obsolete: Pioneer ECT-1530 - Kenwood DTF-103 - Sim2 SMB2700 - Philips 6072 - Humax 5400S - Dreambox 500S - NC+ 5800s BXZB E2

Dreambox DM500HD sim Japhar
Dreambox clone DM800HD sim 2.1
Estarbox DM800SE HD sim Japhar
Zgemma H7s