thank you very much i tryed with the RALINK driver with rt5370sta_2.5_dm500hd-mipsel.ipk its now working its showed in the network that i have instered USB DONGLE but soon as i enter it and press adapter setting again green screen and restart after 10 seconds it wont activate the dongle soon as it start its crashing same as the second dongle its showed in the network everything good but soon as i try to active it its crashing but still i got PID AND VID maybe you could help me more or tell me do i change the newnigma2 to openpli or any other software maybe it wont crash ... because its impossible drivers to be loaded and soon as i try to set it up to crash ps : PID AND VID FOR THE TPLINK

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=8178 Rev= 2.00
S: Manufacturer=802.11n
S: Product=USB WLAN
S: SerialNumber=00e04c000001
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8192cu
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=125us


thank you alot you are the only person that helped me the best way now but im still gonna search to find out why its crashing the newnigma2