Hello Oily,

Probably then it's time to get a Japhar Sim ;o) from http://www.japhar.com/japhar/, the DM800HD is capable of running ALL Japhar images, Ferrari images and Sim2 (2.01/2.10). Just installing the Japhar Sim, your box will then boot smoothly... as a Japhar image is already loaded ;o)

At what I see, if this is the JapharFlasher, did you connected your Rj45 cable to the Router as well as the Rj45 or Wifi of your laptop to the same router ?

Also you need the Rs232 cable connected to the PC, and if possible with a REAL Rs232 port on your laptop.

If both points above are ok, then it should be fine, and you would restore it.

If you use a USB-Rs232, then most probably your problem comes from there.

Remember that with the JapharFlasher, you don't need any "unlock button" tool, as the SSL inside the JapharFlasher should work with ALL Sim, original and all clone sims. So if you don't get the button it means there is a connection problem (Rj45 or Rs232) and this cannot be fixed with "software trick" but only with proper cables/connections.

Did you validated the Rj45 communication/IP ? As for me it is not capable of switching from the Rs232 mode to the WebInterface to upload the data. Put both, box and PC to the same router, that's the best and easiest.

TS