There is 2 PSU Models for the DM8000HD,

Model 1 below, 2 first shots.



Model 2 below, next/last shot (5L0565).



Admin

P.S.: Did you checked the capacitors on your clone PSU ? I would change the 2 big 220uF/250V (V1) or 100uF/400V (V2) (depending of your PSU version), 4 large ones (1000uF/35V) and the one small that is 22uF/50V (C109) Model V1 or 47uF/50V Model V2 depending of the version of the PSU (There is 2 versions). All must be minimum 105°, and if possible Rubycon high quality caps.

On V2 PSU for DM8000HD you could also have to replace a 47uF 50V capacitor (I put 47uF 63V 105°) near to the 2 big ones (100uF/400v), if the box just loops on the Dreambox LCD logo and never reaches the progress bar (loading image).

On V1 PSU for DM8000HD replacing C104 (47uF 25V) by a 47uF 50V get the box the power to have all HDD/DVD/Tuners working. This needs to be replaced if the box stays on the Dream logo at boot or just start booting and then stop and restart booting, going in loop.

All four tuners : 5L0565 PSU