Yes it seems that you measure it correctly.

But if you have,
Network, same symptom, with or without network cable both network leds on, then off.
But the L5 inductor and caps are fine..
*When you check the serial port with a terminal program as Hyperterminal or Putty, and you receive garbage.
Replace the Crystal Y1 54.000.

Or, if you have,
Network, same symptom, with or without network cable both network leds on, then off.
But the inductor L5 and caps are fine..
*When you check the serial port with a terminal progam as Hyperterminal or Putty, and you receive nothing.
Replace the u17 rs232 ic and probably also the crystal Y1 54.000.
_________________________
Doing nothing leads to nothing.

------------- Please note, for technical support -------------
Will be given here, or on the jb8a8f8 forum and I prefer it in English.
Johnny B.

Click on the banner if you like to go there..