The Kernel command line should change to,
console=ttyS0,115200 root=/dev/mtdblock3 rootfstype=jffs2 rw
After you have reset the bios to the Factory default.

If not, copy & paste this command line, and save and exit.
Check it after a reboot, if it's still this normal command line.
console=ttyS0,115200 root=/dev/mtdblock3 rootfstype=jffs2 rw

Because yours is wrong, and could be your network issue.




Attachments
Snap1.jpg


_________________________
Doing nothing leads to nothing.

------------- Please note, for technical support -------------
Will be given here, or on the jb8a8f8 forum and I prefer it in English.
Johnny B.

Click on the banner if you like to go there..