Ok, so I will have to explain you how things work.

SSL = Bootloader inside the image and stored in the Flash of the box.

NFI Image = Full image (Linux+Enigma2) including a SSL.

Sim card = Can be Ferrari, Japhar etc.

The Sim card is "compatible" with specific bootloaders/SSL. If you use the wrong bootloader for the Sim, the Sim will not work with the bootloader and box will block/not boot.

The Japhar SuperSim3 NC3 is capable of running ALL images / Bootloaders from Ferrari, Japhar and Sim2. So all the SSLxxF, SSLxxJ, SSLxxa, SSLxxb, SSLxxc, SSLxxd will work with the Japhar SuperSim3. So you can run Sim2 2.01/2.10 images as well as Japhar images (OpenPli 4.0 IPTV SSL84J) and Ferrari images (SSL84F, SSL87F, SSL88F etc).

You just have to remove the old sim and insert the Japhar Sim, and your box will then recognize all the clone SSL/images.

The necessity to load the SSL first is only needed if the SSL before was lower than 84. If it was already a 84 then you can directly flash the image.

Admin

P.S.: For Members, the NC3 SuperSim3 DM800HD Japhar is available on the Members eshop at http://www.japhar.com/japhar/