Running latest Open Pli with Japhar NC3 on my DM800HD but I keep having crashes while trying to scan& save packages on 42E for example.
Here is the crash log-

<833563.675248> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
<833563.675884> [eDVBFrontend] prepare_sat System 0 Freq 12746000 Pol 1 SR 2222000 INV 2 FEC 0 orbpos 420 system 0 modulation 1 pilot 2, rolloff 0
<833563.676275> [eDVBFrontend] tuning to 2146 mhz
<833563.676546> [eDVBChannel] OURSTATE: tuning
<833563.689465> [eDVBFrontend] set static current limiting
<833563.696691> [eDVBFrontend] setTone 0
<833563.713484> [eDVBFrontend] sleep 25ms
<833563.739172> [eDVBFrontend] set sequence pos 7
<833563.739784> [eDVBFrontend] invalidate current switch params
<833563.859654> [eDVBFrontend] sendDiseqc: e00000(DiSEqC reset)
<833563.861853> [eDVBFrontend] sleep 50ms
<833564.030637> [eDVBFrontend] sendDiseqc: e00003(DiSEqC peripherial power on)
<833564.051678> [eDVBFrontend] sleep 150ms
<833564.333640> [eDVBFrontend] sendDiseqc: e01038f9(?)
<833564.335283> [eDVBFrontend] sleep 50ms
<833564.385674> [eDVBFrontend] set sequence pos 3
<833564.386512> [eDVBFrontend] setTone 1
<833564.397808> [eDVBFrontend] sleep 10ms
<833564.408276> [eDVBFrontend] update current switch params
<833564.408853> [eDVBFrontend] startTuneTimeout 20000
<833564.409426> [eDVBFrontend] setFrontend 1
<833564.409730> [eDVBFrontend] setting frontend 0
<833564.440234> [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
<833564.441499> [eDVBFrontend] sleep 500ms
<833564.451450> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 2
<833564.572328> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 3
<833564.942729> [eDVBFrontend] set dynamic current limiting
<833565.023450> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 4
<833566.866484> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 5
<833567.322302> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 6
action -> SetupActions save
ok
<833575.822504> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 7
<833576.284415> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 8
<833578.000309> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 9
action -> SetupActions save
ok
<833578.462957> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 10
<833580.894419> [eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC
<833580.895745> [eDVBLocalTimerHandler] getRTC returned time=0. RTC problem?
<833584.409318> [eDVBChannel] OURSTATE: failed, fatal
<833584.409959> [eDVBScan] no channels left: 69 scanned, 137 unavailable, 68 database.
<833584.480408> [eBouquet] couldn't write file userbouquet.LastScanned.tv
<833584.480823> [eDVBDB] Renumbering...
<833584.489566> [eDVBDB] ---- saving lame channel db
<833584.490390> FATAL: [eDVBDB] couldn't save lame channel db!
]]>
</enigma2crashlog>
</crashlogs>
</openpli>