Hello Worg,

The DM8000HD has some extra security features, and new clone images OE2.0 are gettings some problems at boot. So you were mostly there when you installed the OpenPLi 4.0 IPTV from here, and got no DVB-C and IPTV. This was due to a "false boot" where you didn't got the bootscreen (Green fields for the actual release).

As you uploaded an original image, you would need now to get back the right clone software into the box, using the RS232 cable (you will need the Rs232 cable + a PC with WinXP and real RS232 for it if possible to have most chances of recovery, as the USB-RS232 are really not reliable).

JapharFlasher : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=2012#Post2012

SSL ALLSIM DM8000HD : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=292#Post292

You will need to use our JapharFlasher (DreamUp for Japhar), to restore your box into the correct Clone software.

This done you will have to reflash the OpenPLi 4.0 IPTV image for DM8000HD Japhar, and boot the box. If you have no green bootscreen, then you will have to turn off the power. Wait 1 minute and then turn on again, this until you have that (vicious ;o)) green bootlogo.

Use images only from the DM8000HD Japhar/Ferrari section you will find here : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=52&page=1

The OpenPli 4.0 IPTV for DM8000HD Japhar : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=1939#Post1939

Then all will work smoothly. This is the "last bug" or security we didn't defeated, yet !

Admin

P.S.: The ERROR message generally is due to the fact that the sim is not correctly inserted/in contact with the sim card socket. Remove the Original Sim and reinsert the Japhar One. I hope you will have no more ERROR.